Factory Price Ip44 Sdcm3 Led Panel Light 2×4

In the process of development, our company continuously learns advanced technology experience at home and abroad, which has continuously improved our development capabilities in the field of Etalaj katon pou bwason gazeuz, Senti LED ak ekleraj sou bò, Pano fenèt pou imobilye. Through standardized management and high-quality service mode, we have improved the management and technical level, so we have gained the trust and support of our customers. We promote a sense of rules and a spirit of contract that are compatible with the market economy and modern governance, so that integrity can be upgraded to a commitment to customers and a guarantee to employees. With the continuous development of the company, the market competitiveness has become stronger and stronger, and multiple distribution points covering most areas have been established in China.

Panèl Limyè LED Plat

Dapre mòd ekleraj la, panèl plat LED yo divize an panèl LED ekleraj bò ak panèl LED ekleraj dèyè. Sous limyè panèl LED ekleraj bò a distribye sou bò lanp panèl la epi li eklere atravè plak gid limyè a. Sous limyè lanp panèl LED ekleraj dèyè a distribye egalman sou plak dèyè a epi li eklere dirèkteman atravè plak difizyon an.

Sou menm wattaj sous limyè tradisyonèl la, panèl plat LED la gen karakteristik tankou ekonomi enèji, bon inifòmite ekleraj, endèks rann koulè ki pi wo, limyè dous ak konfòtab, elatriye. Li te lajman itilize nan biwo, lekòl, lopital, sant komèsyal, kay ak lòt kote pou ranplase lanp griy tradisyonèl yo nan epòk LED la.

Karakteristik

1. Konsepsyon ultra-mens, aparans senp ak alamòd. Apwopriye pou nouvo konstriksyon ak enstalasyon renovasyon.

2. CRI > 80, limyè a sanble ak limyè solèy la.

3. Difize PMMA mat (UGR<19 / <16) ak distribisyon limyè inifòm pou maksimòm pwodiksyon limyè.

4. 0/1–10V, Triac/ELV dimaj jiska 10%; kontwòl koulè RGB & CCT, pa kontwolè a distans oswa WIFI, Dali, DMX, PWM, lòt siyal.

5. Kanopi ak ankadreman solid pou yon enstalasyon fasil ak rapid.

6. Apwopriye pou anviwònman sèk ak imid.

7. Ekonomize enèji, gwo klète, pa gen mèki, pa gen enfrawouj, pa gen iltravyolèt, pa gen entèferans elektwomayetik, pa gen efè tèmik, pa gen radyasyon, pa gen fenomèn estroboskopik.

8. Konfòme ak egzijans UL, DLC, SAA, TUV-GS, CE.

9. Garanti: 5 an.

10. ODM ak OEM disponib.

Panno LED ekleraj sou bò a se sa yo itilize pi souvan, e tanperati koulè estanda 3000K, 4000K, 5000K ak 6000K disponib.

Espesifikasyon

Installation & Application

1. LED Flat Panel Surface Mount

2. Recessed LED Panel Ceiling Light

3. Suspended LED Panel Light

The flat panel light is ideal replacement for the traditional down lights. It has wide range of applications such as:

1. Hotel, residential, restaurant, museum, art gallery

2. Office, meeting room, household lighting, kitchen, school, hospital

3. Commercial lighting, shopping mall, jewelry counter, cosmetic counter, show window, lobby, aisle, etc.

Packaging & Shipping

How to select LED flat panel or identify the quality:

1. The overall "power factor of lighting": If the power factor is low, it means that the driving power supply and circuit design are not good, which will greatly reduce the service life of lighting! If the power factor is low, no matter how good the lamp bead is used, the service life of lighting will not be long. The power factor can be detected by "power factor meter". Generally, the power factor of LED flat panel lamp for export is required to be above 0.85. If the power factor is lower than 0.5, it should be said that unqualified products or garbage products not only have short service life, but also the actual power consumption is about twice as high as the nominal value, that is to say, compared with ordinary energy-saving lamps, there is no power saving at all! Therefore, this is why LED flat panel lamps need to be equipped with high-quality and high-efficiency driving power supply! There is no "power factor meter" to detect the LED lighting function Rate factor consumers, there is another way is to use the "ammeter" to detect two similar products with the same nominal power, the greater the current and the greater the current harmonic, indicating that the actual power consumption is greater, the less energy-saving! At the same time, the current instability is not conducive to the life of the lamp bead and the life of the overall lighting!

2. Lighting cooling conditions -- materials and structure: LED lighting cooling is also very important. If the lighting with the same power factor and the same quality of lamp beads are not well cooled, the lamp beads will work at high temperature, the light decay will be great, and the lamp life will be reduced. The main heat dissipation materials used are copper, aluminum and PC. The heat conduction of copper is better than that of aluminum, and the heat conduction of aluminum is better than that of PC. now, the most commonly used heat sink material is aluminum, the best one is insert aluminum, the second is car aluminum (aluminum profile, extrusion aluminum), the worst one is cast aluminum, and insert aluminum has the best heat dissipation effect!

3. The lamp quality: Lamp quality depends on chip quality and packaging technology.

The quality of the chip determines the brightness and decay of the lamp bead. A good lamp has not only a high luminous flux, but also a low luminous decay.

4. The driving power used in lighting, the service life of the power supply is much shorter than that of other parts of the lighting. The service life of the power supply affects the overall service life of the lighting. The theoretical service life of the lamp bead is 50,000-100,000 hours, while the service life of the power supply is 20,000-30,000 hours. The design and material selection of the power supply will determine the service life of the power supply. The appearance of aluminum alloy power drive is better than that of engineering plastics. First, it has good heat dissipation. Second, it can effectively protect the parts from being crushed and loose during transportation and use, and reduce the failure rate of power drive.

5. The light efficiency: The same power, the higher the light efficiency, the higher the brightness. If the same lighting brightness, the smaller the power consumption, the more energy saving.

6. The power efficiency. The higher the power efficiency is, the better it is. It shows that the smaller the power consumption is, the greater the output power is.

The so-called details determine success or failure. We start from the subtleties, continue to absorb new technologies at home and abroad, and learn from others. The series of Factory Price IP44 Sdcm3 LED Panel Light 2X4 equipment launched is a fully automatic CNC machine tool with optimized technology design and high precision in response to new market needs. High-quality products processed and developed. We keep our dreams alive and are committed to building a responsible and sentimental company, drawing up a beautiful blueprint for the future with our customers. We continuously improve our integrated management policy to meet changing customer needs.